Tuesday, March 19, 2024
HomeExclusiveHow Do You Grill A Steak On A Gas Grill

How Do You Grill A Steak On A Gas Grill

- Advertisment -

Nd Step: The Salt And Cornstarch Combo

Gas Grill Steak, How To Cook With Gas – GardenFork Cooks

Set the dried-out meat aside for a while. Mix the salt and cornstarch in a container until well incorporated. Then rub the mixture to both sides of the steak until every portion of the meat well-coated.

Some might overlook this step, but the salt and cornstarch complement each other. The added salt will draw out the water from the meat and inhibit browning.

The cornstarch will act as the moisture absorbent released from the steak. This way, the meat juice will not get in the way of grilling the steak.

Myth #: Intensely High Heat Is Needed To Sear Steak

The searing process begins at temperatures as low as 300°F, and the effective searing range is about 300°F to 500°F. Searing at temperatures beyond 500°F can dry out food excessively fast, and usually result in disappointing, burnt food.

Searing can happen while your grill is at any temperature, as long as youve followed the number one rule of grilling Always preheat your grill! No mater what youre grilling, the first step is always to preheat your grill on high with the lid closed for 10 to 15 minutes. There are two major reasons this step is important for searing.

First, this will burn off old food so you can brush the cooking grates clean. Dirty cooking grates dont sear new food they just continue to burn the old food.

Second, while the temperature inside your grill can be anywhere from 300°F to 500°F while youre searing your steak, the cooking grates themselves must be at least 500°F to 550°F to create sear marks. Preheat your grill to get the cooking grates to the correct temperature and then adjust your grill to the appropriate temperature before you put your food on.

Myth #: Searing Steak Locks In Juices

Myth #1: Searing locks in juices. There is some sort of misconception that somehow the entire surface of a piece of food can be melted into an impenetrable layer that juices cannot escape from, which is completely impossible. Searing actually removes more moisture from food, but this does not detract from the great flavor and texture contrast that searing provides to food.

Sear marks are a delicious hallmark of grilled good. Not only does searing food caramelize the outside of the food and whatever seasonings you used, creating a one-of-a-kind flavor, but it also gives grilled food those recognizable markings that make your mouth water. Sear marks look and taste great, but, alas, they do not lock in juices.

Its true that the heat from the grill will actually push juices out by causing the muscle fibers to contract. Those juices can be saved, however, as long as you grill food for the correct amount of time, and of course, let your food rest for 30% to 40% of the total cooking time before you cut into it.

If youre a Weber enthusiast, I know youve seen this rule before. Letting your food rest allows those muscle fibers to relax again and the juices to run back into the meat, keeping it moist and delicious.

Read Also: Steak N Shake Spicy Chicken Sandwich

How To Cook Ribeye Steak

How to cook steak depends very much upon the cut you choose. Ribeye steak is always a popular steak choice, prized for its tenderness and flavor. The best way to cook ribeye steak is on the grill. But pan-seared ribeye steak is also delicious, and you can broil ribeye steak in the oven as well. No matter which method you choose, our cooking instructions and video will deliver the tender and juicy steak you crave. Use a meat thermometer and you can be sure your steaks are cooked to perfection!

How To Cook A Really Thick Steak

How to grill porterhouse steaks on a gas grill ...

Tutorial

  • Preheat the oven to 250 F. Place the steak on a rack on a baking sheet. Puree with 1 tablespoon oil, season with salt and pepper.
  • Heat oil in a medium saucepan over high heat. Add the steak and fry until golden and crispy, about 3 minutes. Hold the steak on the sides and grill edges for 1 minute on each side.

You May Like: Omaha Steaks In Store Specials

What Are The Best Types Of Steaks For Grilling

Out of all proteins, steak is particularly well-suited to the grill. The high heat delivers a gorgeous sear, caramelizing the exterior and quickly heating the interior. That said, each kind of steak requires a slightly different method.

This particular recipe works best with boneless strip steaks that are at least 1 inch thick, but 1 1/2 inches is even better. Strip steaks are a great starter steak because they are well-marbled, meaning theyll cook up juicy every time, but not be full of fat that you have to worry about flare-ups. Plus, theres no bone to work around.

Charcoal Or Gas Grill For Steak

Charcoal or wood-fired grills are always the best choice for grilling steaks because of the additional flavor and charring they provide. If you have a charcoal grill, you also can add different kinds of wood to the fire to contribute smokiness and enhance the overall flavor of the meat.

Dont worryyou can still cook a great steak on a gas grill. If using gas, open the lid, turn on the gas, and light the grill. Dont light the grill with the lid closed gas can build up inside the grill and create an explosion.

You May Like: What Is A Good Steak Knife Set

How Do I Slice And Serve Grilled Steak

Conventional wisdom is to rest a steak before you slice it, but Id argue that a steak hot from the grill is the best, juiciest steak you can have. With that in mind, remove the steaks from the grill and slice across their grain immediately. Top the warm steak with slices of the compound butter and enjoy immediately.

How To Grill Steak Perfectly:

How to grill steak on gas grill

First you are going to want to pick your cut of meat. Now, everyone loves a good filet mignon, I am not exception. The other go-to is a New York Strip classic. But, my absolute favorite is a ribeye. There is just enough fat marbled through it that it marinates itself as it cooks and stays incredibly moist and tender. The flavor is amazing. It is my go-to. Go grab a 1 inch ribeye for you and whoever else you are having over..

But Filet Mignon is hard to beat!

Next, after you go out and grab your cut of meat, you are going to want to let it come to room temp before you season your meat. Just salt and pepper people. You dont need to reinvent the wheel. But first, take a fork and pierce the meat all over fat and everything. Then sprinkle with salt and ground black pepper on both sides enough that it will be nicely seasoned, but not over-powered with either.

You can also if you want always fun to mix things up!

After you have cleaned your grill thoroughly with your brush, spray it with a grill-worthy non-stick spray and then turn it up to 450-500.

Place steak over direct heat to sear let it stay over direct heat for 3-4 minutes. Flip and sear an additional 3-4 minutes on the other side. If you are cooking a fattier meat, like a ribeye, you will probably want to move the steak over to indirect heat at this time. Leaner meats, like a New York Strip or Filet should be left over direct heat the entire time.

You May Like: Best Steak Knives For The Money

Salting Early Pays Off

You might have heard the warning that you shouldnt salt meat too far in advance of cooking because it can draw out moisture. Its true that salt draws moisture towards itself, but over the course of 20 to 30 minutes thats a good thing, because the salt begins to dissolve into that little bit of moisture.

When the steak hits the hot cooking grate, the sugars and proteins in the moisture combine with the salt and other seasonings to create a delicious crust. Any moisture you might lose is well worth the flavor of that crust.

Steak Cooking Time & Temperature

A key element in learning how to BBQ steak flawlessly is knowing the finished temperature depending on personal preference when it comes to your meats doneness. Heres a quick list of cooking temperature per steak doneness and key indicators to help you determine when the meat is ready to be taken out of the grill.

  • Rare: 120-125°F internal temperature red, shiny, and soft when touched

  • Medium-rare: 130-135°F internal temperature deep red to pink, soft but firm

  • Medium: 140-145°F internal temperature pinkish color in the center part, a bit firmer

  • Medium-well: 150-155°F internal temperature very light pink center with slight graying on the edges firm but tender meat

  • Well-done: 160°F+ internal temperature no hint of pink color anywhere meat is very firm

To check the internal temperature precisely and conveniently, we recommend using a digital BBQ thermometer or meat thermometer. This stops you from opening the lid. To ensure your steak remains juicy and tender, never cut into it to check doneness and use tongs to prevent the meat from being pierced. Remember that when the lid is closed, the grill will be able to maintain optimal cooking temperature, resulting in beautifully and evenly cooked steak. When youve taken it off of the fire, allow to rest for 5 to 10 minutes before slicing and serving.

Read Also: What Is The Most Tender Steak

How Long Should I Cook A 2

Use pliers to turn the meat over and continue cooking. The grilling times vary depending on how rarely you like your steak rose another three to five minutes for medium rare, five to seven minutes for medium or eight to 10 minutes for medium delicious. Check the meat to see if it is cooked through.

Instructions For The Perfect Steak On The Grill

Grilling Ribeye Steaks Gas Grill for Sale
  • Allow steaks to sit at room temperature for 20 to 30 minutes. In the meantime, fire up your charcoal or gas grill . Make sure the heat is high before beginning to grill.
  • When youre ready to start grilling, brush both sides of the steaks with oil and sprinkle generously with your choice of seasoning or rub your steak rub into the meat.
  • Place steaks on the grill over the area with the most heat. Allow steaks to sear on that side for 3-5 minutes, or until a brown, crisp crust forms. Flip the steaks over with tongs and do the same to the other side.
  • How long to grill steak depends on the type of cut you chose and their thickness. Remove from the grill when a digital meat thermometer reads 135 degrees for medium-rare or 140 degrees for medium. If your steak is still rare after searing both sides, you may need to move each piece to a low-heat area of the grill, close the lid, and wait a couple of minutes for the heat to continue cooking the inside.
  • Place the steaks on a cutting board and allow to rest for 5-10 minutes, giving the juices time to work back through the meat to create the perfect steak.
  • Don’t Miss: Nordic Ware Sizzling Steak Server

    How To: Grill The Perfect Steak

    I almost named this post, How to cook a steak that doesnt suck. Vegetarians beware this one is not for you . Go browse our dessert section today while the rest of us stay here and look at slabs of beef. Its no secret that Kate and I like our meat. Ive actually noticed at a lot of the business related events we attend where fancy dinners are involved, the women in attendance almost always order fish, or grilled chicken, or a stinking side salad, and then leave 3/4 of it on their plates when theyre finished. If theres a beef filet on the menu, Kate and I both order it about 98 percent of the time. And you better believe we chow down every last bite too. I want to show you all that you really can cook an awesome restaurant quality steak at home. You can also totally ruin a perfectly good restaurant quality steak at home. So follow our steps to grill a steak that doesnt suck, okay?

    1. Choose the Right Cut

    I could write a whole post on different cuts of steak, so just for today well focus on the most traditional backyard bbq steaks. My personal favorites for grilling are Rib Eye and NY Strip, so Ill show those in my photos. If I had to go for just one, Id pick a rib eye every time.

    *If you are working with a less-expensive cut of meat, check out this cool method of salting. Jaden of Steamy Kitchen has a fantastic explanation of how to turn cheap choice steak into Gucci prime steak

    5. Finish Cooking

    7. Embrace your carnivorous side.

    Grilling Steak Step By Step

    October 7, 2020·

    Last week we talked about how to grill a perfect hamburger by focusing on technique. This week well keep focusing on grilling technique and walk step by step through grilling steaks like an expert. You see, a lot of people really over-think grilling steaks. I have had some really elaborately prepared beef jerky grilled by some great people with the best of intentions. Its often hard to sit back and watch the host destroy a perfectly good steak. But hey, its not my party. Ill do the next best thing and break down the simple steps to grilling the perfect steak. In this case, Im grilling sirloins . But this technique is the same for all cuts of beef up to an inch thick. Steaks over an inch thick will require a little more time to cook through, so adjust your times accordingly. And remember to err on the side of rare . Enough intro, lets get down to it

    • fresh ground black pepper

    Also Check: Where To Find Tomahawk Steaks

    Internal Temp Of Steak

    To check the internal temp of steak use an instant-read thermometer. Insert it into the thickest part of the steak. Here are the temperature ranges to look for :

    • Rare : 120 130 degrees
    • Medium-Rare : 130 140 degrees
    • Medium : 140 145 degrees
    • Medium-Well : 145 155 degrees
    • Well-Done : 160 degrees

    Setting The Temperature To Grill Steak On A Gas Grill

    Tomahawk Ribeye On A Gas Grill | How To Cook Steak

    Judging how well a steak is done only by its cooking time is a common mistake. The temperature to grill a steak varies according to the steaks size and thickness, type, and shape of the cut .

    To ensure you prepare a perfect BBQ steak, here are the necessary temperature settings to grill your steak on a gas grill. Generally the thicker the steak, the lower the temperature you need to grill a steak.

    Also Check: Steak N Shake Paystub Portal

    Starting With The Steak

    You need to know what kind of steak you are cooking to cook it perfectly.

    There are different cuts of meat that you can get and there are some specific features to look for.

    Understanding the different cuts of steak will help you set the temperature, timer, and accessories you need to cook it.

    Research a bit before you head to the supermarket to buy.

    So lets talk about steaks.

    My favorite and perhaps the most common cut of steak you will find in butcher shops and supermarkets is the filet mignon, also known as the tenderloin.

    It is the most tender cut that you will find in any cut of meat on the market. It is soft so when you cook it, it requires the most delicacy from you so it does not stick to the grill or come out overcooked.

    The next common type of steak you will find is the top sirloin steak.

    It is also known as the New York strip or the Kansas City strip which contains a beefy flavor and is slightly tender.

    It is not as tender as the tenderloin but it is up there.

    When you get a New York strip, the advantage you get is the flavor as it does not have too much marbling and is full of meaty flavors.

    The T-bone steak or the porterhouse steak is one of the largest cuts of steak.

    It comes from the upper rib which also means that it has decent marbling and is softer when cooked.

    Ribeye is also one of the more common cuts of steak and it is up there when it comes to my favorites. Flank steaks and skirt steaks are also there for my fajitas and meat fillings.

    Here Are Instructions For A Great Grilled Steak:

    1. Preheat your grill with all of the burners on high or the dampers open and the lid closed for 10 to 15 minutes.

    2. Remove your steaks from the fridge, season them, and allow them to come up to room temperature while your grill is preheating. A room temperature steak will cook faster than a cold one will, and less cooking time means less time to dry out. Additionally, a cold steak will contract more when you put it on the grill, pushing more of the juices out.

    3. Brush your cooking grates clean and adjust your grill for direct, high heat. The best temperature for steaks is 450°F to 500°F.

    4. Put your steaks on the grill, close the lid, and set your timer for 2 to 3 minutes, depending on the thickness of your steak.

    5. Flip your steaks to a new area of the cooking grate. Theyve already absorbed the heat from the area of the cooking grate they were placed on first. Putting them somewhere new ensures that the cooking grate is still hot enough to create those beautiful sear marks.

    Close the lid and set your timer for an additional 2 to 3 minutes.**

    6. Test your steak for doneness.

    7. Once your steak is cooked to your liking, remove it from the grill and let it rest for 30% to 40% of the total time on the grill.

    8. Enjoy!

    **A thicker steak will require a longer cooking time. If thats the case, follow steps 1-5 to sear, and then move your steaks to an indirect zone to finish them. This will prevent the outside from burning before the inside is cooked.

    You May Like: What To Marinate Steak With

    RELATED ARTICLES
    - Advertisment -

    Most Popular

    - Advertisment -